Vinyl windows increase a person's home value and home appearance. It can be cleaned very quickly. But, however, proper maintenance of vinyl windows is necessary as it becomes dirty quickly. With the help of heavy rain, the windows in Denver can be cleaned very quickly. But if even after that the windows are not cleaned the following instructions can clean them. Always wash the window with the help of a soft cloth or a soft brush. Sometimes it may be difficult to remove stains such as crayon, felt pens, lipstick, bubblegum so cleansers can be used to remove stains very quickly. Do not use cleansers such as nail polish remover, furniture polish as it could damage the surface appearance of the vinyl windows and doors.
Remove all the stickers and labels with the help of a soft cloth. Try to avoid high pressure spray to clean the windows. Do not use blades, knife to clean the doors and windows as their might be scratches. Roller can be cleaned once in 6 months. To clean it first use the vacuum cleaner to take out the loose material, then use a cloth and water and a dish wash liquid to finish the cleaning. Proper maintenance of weep system is required to assure proper drainage. Water can be filled up in sill or track. It should be cleaned regularly to avoid dust. A soft bottle brush can be used to clear the openings. Casement window should be cleaned regularly. To clean this use a soft cloth soaked in water with a dish washing liquid.
Due to UV rays from the sun, your Denver windows and doors may be worn out in order to avoid this repaint and re-caulk should be done every year. Try to clean the brass hardware on the window with the help of a soft cotton cloth. Clean the window track regularly otherwise dust will build up and it may become harder to open them. The screens should also be cleaned regularly to avoid bugs to enter. To clean the screen soak them in a tub full of water and then clean it with a garden hose. This may increase the screen life.
Condensation means the fog that can be seen on the glass of your Denver windows. It happens because of high humidity in the house. It generally appears as moisture on the glass of the window. If moisture is seen on the windows it is because of high humidity at home. When the interior temperature of the house is 70 degrees the inside humidity should be according to the outside temperature. When the outside temperature is -20 degrees and below the inside humidity can be 15 percent. When the outside temperature is 10 F to 0 F the inside humidity can be 30 percent. Considering the outside temperature the inside humidity has to be adjusted. Humidity can be reduced by opening the curtains everyday so that the house air can enter the window. Let air circulate in the bathroom, kitchen everyday so that there could be less humidity. Try to keep the humidity level of the house under control with the help of a humidifier. Keep in mind that items such as clothes exhaust fans, gas heaters are vented properly.
I hope these tips for maintaining your vinyl windows and vinyl doors has been helpful. Remember, if you do not keep up with cleaning these products, they will not last as long.
.jpg "Free Traffic System - Increase Targeted Website Traffic with Free
Unlimited One Way Links")
Showing posts with label denver doors. Show all posts
Showing posts with label denver doors. Show all posts
Wednesday, November 5, 2008
Monday, October 20, 2008
Fixing the Sticky Window & Door
By: Ray Walberg
If you're like me, I'm sure at some time you've tried to open your door or a window only to have it stick. The first time you just ignore the problem. Many times after a year or so, you find yourself telling your guests, "turn the knob the other way or it will stick". We all have a tendency to put things off as long as they still work somewhat. Windows and doors can stick for a number of reasons. Sometimes wood expands and contracts, parts may have been painted over two parts may be get fused together. Once you determine the cause, you can fix it yourself.
After a recent installation of a bay window, I found that the contractor had painted the windows closed. If paint is the culprit, you can scrape or cut it out with a putty knife or window zipper. Hold it flat against the sash, push it into the joint, and draw the zipper along the surface. If there is year's accumulation of paint, remove the excess paint with a paint scraper. Make sure you get all the parts that have excess paint, opening and closing the window throughout the process. You may have to remove the window to scrape paint off the sash. If this doesn't work, you may have to strip the paint down to the bare wood and repaint them. A commercial painter remover will do the job well. Make sure the paint is thoroughly dry before you reinstall the window or you'll have the same problem.
If the problem is too much friction, you can use candle wax or talcum powder to lubricate the channels of the sash. If weather-stripping is in the sash channels, flatten the weather strip with a hammer and block of wood.
If you can't seem to find what's causing the problem, you may have to just jar it loose a little with a rubber mallet or the palm of your hand. Gently tap the sides of the sash. You may want to install new friction channels. You'll need to remove the sashes, weights and pulleys before you begin. Push some fiberglass insulation in the openings of the weigh cavities, starting at the top and working down. Put in the ends of the top strip to make new friction channels. A sharp chisel and hammer works well for this. Replace the sashes in the window frame between the two new channels. You can then reinstall the interior stops the way you would if they were new. You may have to increase or decrease the tension on the window.
Doors usually stick for similar reasons except for the additional problems hinges may cause. Occasionally the door will rub against the jam, in which case, you need to shim the hinges out. If the rubbing is on a side where there are no hinges, you may need to readjust the door. Remove the door and use a plane to shave some of the door until it fits. Other simple problems such as loose screws or hinges can be easily fixed by tightening them.
If you're like me, I'm sure at some time you've tried to open your door or a window only to have it stick. The first time you just ignore the problem. Many times after a year or so, you find yourself telling your guests, "turn the knob the other way or it will stick". We all have a tendency to put things off as long as they still work somewhat. Windows and doors can stick for a number of reasons. Sometimes wood expands and contracts, parts may have been painted over two parts may be get fused together. Once you determine the cause, you can fix it yourself.
After a recent installation of a bay window, I found that the contractor had painted the windows closed. If paint is the culprit, you can scrape or cut it out with a putty knife or window zipper. Hold it flat against the sash, push it into the joint, and draw the zipper along the surface. If there is year's accumulation of paint, remove the excess paint with a paint scraper. Make sure you get all the parts that have excess paint, opening and closing the window throughout the process. You may have to remove the window to scrape paint off the sash. If this doesn't work, you may have to strip the paint down to the bare wood and repaint them. A commercial painter remover will do the job well. Make sure the paint is thoroughly dry before you reinstall the window or you'll have the same problem.
If the problem is too much friction, you can use candle wax or talcum powder to lubricate the channels of the sash. If weather-stripping is in the sash channels, flatten the weather strip with a hammer and block of wood.
If you can't seem to find what's causing the problem, you may have to just jar it loose a little with a rubber mallet or the palm of your hand. Gently tap the sides of the sash. You may want to install new friction channels. You'll need to remove the sashes, weights and pulleys before you begin. Push some fiberglass insulation in the openings of the weigh cavities, starting at the top and working down. Put in the ends of the top strip to make new friction channels. A sharp chisel and hammer works well for this. Replace the sashes in the window frame between the two new channels. You can then reinstall the interior stops the way you would if they were new. You may have to increase or decrease the tension on the window.
Doors usually stick for similar reasons except for the additional problems hinges may cause. Occasionally the door will rub against the jam, in which case, you need to shim the hinges out. If the rubbing is on a side where there are no hinges, you may need to readjust the door. Remove the door and use a plane to shave some of the door until it fits. Other simple problems such as loose screws or hinges can be easily fixed by tightening them.
Thursday, October 16, 2008
Increase The Value Of You Home
There is no better way to increase the value of your home than to replace your windows with new fiberglass replacement windows. The installation of fiberglass windows will add to the resell value of your home and improve the appearance from inside and out. Another great benefit you get from installing replacement windows in your home is the added energy efficiency windows provide. If you live in Denver, replacement windows with improved energy efficiency are a must. Heat loss through windows is one of the leading causes of high energy bills.
Prestige Window & Door has the highest quality fiberglass windows in Denver. The fiberglass windows carried by Prestige Windows are very affordable. Their professional, knowledgeable staff of window & door consultants can design the right custom solution for your unique needs. Denver residents can click the following link to submit a Request for Estimate and a sales representative will come right to your door.
Prestige Window & Door has the highest quality fiberglass windows in Denver. The fiberglass windows carried by Prestige Windows are very affordable. Their professional, knowledgeable staff of window & door consultants can design the right custom solution for your unique needs. Denver residents can click the following link to submit a Request for Estimate and a sales representative will come right to your door.
Subscribe to:
Posts (Atom)
